What is the difference between 3.73 and 4.10 gear ratio jeep




















Hi, Is anyone running on 31" tyres with a 3. I'm trying to make my mind up as to which way to go. In the uk we need to keep the entire tyre within the wheel arch. It would be easier to re-gear to 3.

Any observations would be greatly appreciated. Difficult to find any advice as in the States you all seem to favour 33" or 35" Tires. Chris Administrator Staff Member. Ride of the Month Winner. Can I alter the heading as I meant to put 31" tyres. Pat Goode said:.

Click to expand Like Chris said more info is needed for an accurate recommendation. That said I would first ask yourself what size tire do you see your jeep running in 3 - 5 years.

I have a 5 speed transmission and ran 4. It was fine but 4. I now have 35 inch tires and run 4. If I did more trails then highway I would have choose 5. I would assume that 4. Reactions: MonkeyMike. I ran 31's with a 4. It was acceptable.

Supporting Member. Alex01 said:. Reactions: MaloStapalo , AndyG , tomtaylz and 3 others. Joined Oct 29, Messages 6, Location Orygun, the wet side Jerry Bransford said:.

The factory agrees, 4. Joined Aug 30, Messages 74 Location los Angeles. I have 31s on 3. I would go with the 4. Highway performance and fuel economy is not my greatest concern. LPG Conversion Its a hobby vehicle, not a daily driver. I will mostly be using it for off road use and unfortunatly we don't have the wide trails in the UK that you have in the States. I do a lot or what we call over here, RTV's. Road Taxed Vehicle Trials Which involves navigating through an off road course made up of sections, These are quite narrow and tight, hence the need for smaller tyres close into the body.

The main advantage is having good low range gearing. Obvously Re-Gearing is a compromise, as like most of us I don't have an unlimited budget. Unfortunatly Wrangler are quite rare in the UK and donor parts scarce. I run 31's with an auto trans, X model. If you have two vehicles with an identical engine, one with 3.

The same can be applied to someone who likes to race, especially those who like drag racing mph in less than 10 seconds. Anyone that likes drag racing knows how important it is to have a good reaction time after starting the car and while driving down the track. A vehicle with 4.

The main reason that the 4. At extremely low speeds, only 2nd and 3rd gear are used and are therefore slower than the final ratio of 1st. On this particular website, the gear ratios are obtained by measuring how far a specific speed is placed in each gear.

In order to determine how far the vehicle travels in one complete rotation, engineering formulas must be applied to achieve an approximate velocity for one complete revolution. In this case, we will be taking into account how fast a vehicle travels at 30mph with 4. The result gives an approximate velocity for one full rotation of a vehicle with 4. Skip to content Home Uncategorized 3. What is the difference between the 3. Contents show. Related Posts.

About The Author.



0コメント

  • 1000 / 1000